A Guide to Creating 3D Text in Adobe Illustrator


Here is what we’ll be constructing in this tutorial. Click on the image below to see it in full scale.


Step 1: Adding the Text

We are going to start off by typing out some text. Click on your Type Tool (T), click and drag a box on the artboard for your text, then type out "DESIGN TEXT" in two lines. This will give us the shape we are looking for. You can adjust the size of the text by opening up the Character Panel (Window > Type > Character or press Ctrl/Cmd + T). The font I am using is Adelle Basic Bold, but you can use another similar font if you prefer.

Adding the Text

Step 2: Convert Text to Paths

Now we are going to covert the text to shapes so it will be easier to work with. Using your Selection Tool (V), click on the text and then go to Type > Create Outlines (Shift + Ctrl/Cmd + O).

Convert Text to Paths

Step 3: Adjusting the Kerning and Leading

The kerning (space in between the letters) and leading (space in between the top word and bottom word) of the text should be adjusted to make everything fit tighter.

First, we need to ungroup the text, so go to Object > Ungroup (Shift + Ctrl/Cmd + G). This will make it so we can click on each letter on its own.

Click and drag a box around "TEXT" with the Selection Tool (V) to select just that word, and then move it up closer to "DESIGN".

Adjusting the Kerning and Leading

To fix the kerning of "DESIGN", we want to drag a box around "DESIG" — excluding "N", the last letter — with the Selection Tool (V). Since we want the "N" of "DESIGN" and the "T" of "TEXT" to stay lined up, move the slected letters in towards the right by a space or two. Repeat this with "DESI", "DES" and so on until the text is tightened up evenly.

Adjusting the Kerning and Leading

Step 4: Adding Color

Since it will be easier to see the sides of the 3D text, we are going to add color to the letters. First select all the letters of "DESIGN" and fill it with a yellow.

Note: If you don’t see the Color Panel open, you can go to Window > Color (F6). And if you don’t have RGB set up as your color mode, you can click on the arrow at the top right of the Panel, then click on RGB in the options.

Adding Color

We are going to do the same with the "TEXT", but it will be a light blue.

Adding Color

You can put the colors in your Swatches Panel (Window > Swatches if you don’t see it) by simply clicking and dragging your color into it from the Color Panel.

Adding Color

Step 5: Adjusting Size

We can start working on the 3D text now. First, though, we should make the text fill up the artboard a little bit more. Select both words, hold down Shift (to keep the text from distorting), and then drag a corner anchor out to make it larger.

Adjusting Size

Step 6: Getting into the 3D Text

Let’s start working on the 3D text. First, group the letters by choosing Object > Group (Ctrl/Cmd + G) so that when we make our text three-dimensional, the letters stay as one shape instead of becoming individual 3D shapes.

Getting into the 3D Text

Next, choose Effect > 3D > Extrude & Bevel, which will open an Options dialog window. In the 3D Extrude & Bevel Options dialog window, click on the Preview option check box to see how the text is going to look.

These are your default settings whenever you open up these options.

Getting into the 3D Text

Step 7: Adjusting the 3D Text

Let’s start playing around with the 3D Extrude & Bevel options. The blue square on the 3D box in the options dialog window is the face of the text. You can click and drag each edge of the cube and see how they change your 3D text.

For our text, we want to make the words look like they are lying down on the ground, so tweak the Position options in such a way that your text looks like it’s flat on its back.

Adjusting the 3D Text

Adjusting the 3D Text

Step 8: Adjusting Perspective

The top right corner of "DESIGN" looks out of place and not really within the perspective. To fix this, we can adjust the Perspective to about 50o for our text.

Adjusting Perspective

Adjusting Perspective

Step 9: Adjusting Height

Finally, we are going to adjust the height of the sides of the text with Extrude Depth to make them slightly shorter (to 40pt).

Adjusting Height

For our purposes, those are the only options that we need to change on the text, so push OK to commit the settings.

Adjusting Height

Step 10: Converting the 3D Text to Paths

The text looks OK: it has some basic shading, but overall, it’s pretty dark and pretty bland. Besides, we want to add some stylized shading onto it to make it more interesting.

To start editing the text, go to Object > Expand Appearance. This will take the 2D text and make paths for the 3D text.

We need to ungroup the text so we can start working on different parts of it.

Tip: Grouping and ungrouping objects are two common Illustrator commands. I suggest getting used to the keyboard shortcuts for them — Ctrl/Cmd + G (Group) and Ctrl/Cmd + Shift + G (Ungroup). In this instance, the keyboard shortcut will be easier because we are going to have to ungroup quite a few times to make sure everything is ungrouped.

Converting the 3D Text to Paths

Step 11: Adjusting the Text Face Color

Select the face of the "DESIGN" letters by clicking on one face, holding down Shift, and clicking on the others to select them all at once. To apply the color, click on the yellow swatch that we put into the Swatches Panel.

Do the same with the "TEXT" and the blue color we chose.

Adjusting the Text Face Color

Step 12: Creating the Shadow Colors

To shade the sides of the text, we need to create more colors. We want to have two more yellows: a dark one and a darker one.

To make the other two yellows, click on the original yellow color that we used for the "DESIGN" face in the Swatches Panel and subtract 40 from R and G (e.g. 247, 187, 14 becomes 207, 147, 14). Click and drag this yellow into the Swatches Panel and create another yellow by subtracting another 40 from R and G so it becomes 167, 107, 14. These will be our 3 yellows.

Repeat this for the blues as well, subtracting 40 from G and B so it becomes 113, 146, 170 and 113, 106, 130.

Creating the Shadow Colors

Step 13: Simplifying the Curves

You’ll notice that when you click on some of the curved shapes, they are split into two pieces. We want to make these two pieces into one, so open up the Pathfinder Panel if you don’t have it open (Shift + Ctrl/Cmd + F9). Click on one part of the side, and then holding down Shift, click on the other one.

Click the Unite command in the Pathfider Panel, then click Expand.

Simplifying the Curves

This will combine the two shapes into one. Do this with all of the curved shapes that are separated.

Simplifying the Curves

Step 14: Adding Dark Shadows

Now we need to decide which sides are going to get our light source and which sides aren’t. Since the light source is already set up on the right, we’ll use that. Therefore, the bottom parts of the text and the left sides of the text are going to be the dark yellow, with the left sides the darkest. So let’s use our darkest yellow and blue on the left edges of the text.

Adding Dark Shadows

Step 15: Adding Lighter Shadows

Use the middle blue and yellow shades on the rest of the sides of the text.

Now, we can stop here and stay with this block shading, or we can go a step further and add some color gradients to make the shading richer. For this tutorial’s sake, let’s go ahead and add in some gradients.

Adding Lighter Shadows

Step 16: Creating Shadow Gradients

Let’s create some gradients now. Open up the Gradient Panel (Ctrl/Cmd + F9) if you haven’t already.

Click and drag the brightest yellow color swatch to the left side of the gradient, and the second yellow to the right side of the gradient. Now click and drag the gradient into the Swatches Panel. Create a gradient the same way as the first one using the middle yellow and the dark yellows. You should now have two yellow gradients. To apply the gradients to particular pieces, you just select that piece and click on the gradient color swatch.

Repeat this with the blue gradients.

Creating Shadow Gradients

Step 17: Adding Gradients to the Lighter Shadows

Now, remember our light source is coming from the right, so the shapes are going to cast a shadow from right to left. With that in mind, click on the lighter text sides and then click on the lighter gradient.

To adjust the gradient, click on the Gradient Tool (G) from the Tools Panel. You can click and drag across the shape to adjust the gradient.

Adding Gradients to the Lighter Shadows

Step 18: Finishing Up the Lighter Shadow Gradient

Continue adding a gradient to the lighter areas of both the words. There is no exact science to the way we’re adding in the color gradients, it’s just a matter of getting a difference in color between the different pieces, making things stand out more, and giving them subtle variations in lighting.

Finishing the Lighter Shadow Gradient

Step 19: Adding the Darker Shadow Gradients

Repeat what we did with the lighter areas and add dark gradients to the darker areas. The darker areas are going to be lightest at the top and darkest at the bottom (where there is the least amount of light).

Adding the Darker Shadow Gradients

Step 20: Lightening the Text Faces

We can call it good as-is, but if we want to make the text faces a little more visible, we can click on each letter face (holding down Shift to select the invidual pieces together), then Ctrl/Cmd + C (Copy), and then Ctrl/Cmd + F (Paste in Front).

Fill these copied letters with white. Open up the Transparency Panel (Shift + Ctrl/Cmd + F10). Change the Blend Mode to Overlay and the Opacity to 30%.

Lightening the Text Faces

Tutorial Summary

That’s it folks. This tutorial went over some techniques for making great 3D text with accurate shadings. We didn’t use 3D-rendering software — just Illustrator. The great thing about constructing 3D objects in Adobe Illustrator is that you can adjust the size of the lettering so that it can be as big or as small as you want (because it is, after all, a vector object) and import them easily into other Adobe Creative or Production Suite software as well as third-party products. 


Download Source Files

  • Fantastic tutorial – thanks a lot for taking the time to do all this. I though I had it sorted until I saw what was possible, and how to achieve.

    Big UPs!

  • This is an amazing tutorial. I love this, thanks!

  • Nice tut! I enjoyed following along with this one.

  • Aftab Alam

    It is amazing tutor.. and we like to see more like this kind of stuff…
    thanks man…

  • woravit poras

    Thanks for your tutorial. It help me so much.
    (My english isn’t very well.)

  • Marie-Lise

    Merci beaucoup! Thanks a lot for this tutorial, all is very well explained.

  • Rebecka

    Awesome tutorial Denis!

  • Ana

    Great!! I’ll totally recommend your post!


  • Thanks for posting this. Even if its not something I’d do in Illustrator going through this tutorial will teach me a lot.

  • There are definitely many useful techniques in this tutorial; even if you don’t necessarily follow it step-by-step. You might discover a trick or two that can improve your workflow.

  • Guyreg

    To all of you. You just know how to make tutorials. High class stuff guys and galls. Keep the great work.

  • thnx mate…very kool tut

  • Nice tutorial. The “Perspective” option was the part that I kept screwing up on. Reading this erased 45 minutes of a poor trail and error attempt I did with Illustrator/Photoshop.

  • Mike

    Thanks Tyler. Great tut!

  • Dallas

    WOW… I did it (95% of it) and it was rather easy due to the step-by-step instructions provided. Illustrator is NOT a program I use a lot (almost never) but the instructions made it really easy to follow and do what I needed to.


  • Totally awesome. Thank you. Feels good to learn something new.

  • Jen

    Great tutorial. Extremely helpful!

  • Tikva

    Sooooo helpful I can’t put into words.Thanks immensely

  • Brilliant Tutorial for 3D, would recommend it.

  • AP

    Very helpful, easy to follow! Great! Thank you very much!!!

  • sally

    I got stuck on step 13. . “Click on one part of the side, and then holding down Shift, click on the other one.”
    All that does is select two small chunks… And when I try to select all the chunks manually, and click expand, segments disappear. I don’t understand what is supposed to be happening on this step…

  • rismo

    Hi Sally. On step 13, you should be using the pathfinder tool (shift+ctrl+F9 choose unite), not the expand tool.

  • Adam

    Solved my problem in a very quick and efficient way – thanks!

  • Tanya

    Thank you! I could never get my shadows to look right, seems i was missing a few steps.

    Great help

  • Jen Kent

    Thank you!! My class is online and I have never used Ai before, and my teacher is not very helpful at all and my only help is in South Africa!!! I finally got my first assignment done!!! You are a blessing!!!!

  • Helena

    This helped greatly! However sometimes it leaves a huge gray box around it and doesn’t do the 3D image. How do I fix it?

  • Kim

    Thanks for this super helpful tutorial!

  • nice technique! thanks!

  • Ner

    This is really helpful!

    Thank you!

  • Amdad Hossain Bhuyain

    Very Nice! it is help full for a new designer

  • here is something more – you can play with the 3D ‘oblique projection’ effect as well. I’ve created an Adobe® Illustrator® Plug-in called Oblique Projection ‘opo’ to automate the creation process of Parallel 3D Effect (Extrude Effect). It is quick and gives you full control over the appearance of the extrusion

    plug-in available here:

  • Sasa

    fantastic! it probably best tutorial ever i had found

  • Delores VanCartier

    This has been very useful in something i’m doing. Even 4 years after this tutorial was created. AMAZING! thank you.

  • Marcelo

    Amazing Tutorial, It helped me a lot. Thank you!

  • Raghav

    This is really helpful!

    using nice technique…

    Thank you!

  • Abraham

    Ahhhmm .. It’s very unique style 🙂 thank you !

  • Jordan

    Awesome! Thanks for this great tutorial 🙂

  • Boris

    This is great work bro. Just straggling to learn at home. Your tutorial was of great help to me.